Yes, but a 7m-ge W58 bellhousing and a 7m-ge W58 flywheel will be required. There are also differences in the throwout bearings, make sure to get the correct one for the pressure plate you will be using. www.driftmotion.com
Yes it will, the w58 tranny which came with the non turbo 7m will fit using the 2jzge bellhousing, and the r154 which came with the turbo 7m will fit using the 1jz bellhousing.
Take out the 7M and put a JZ engine in it. www.driftmotion.com
if you have ignition coils you have to remove them and the intake tube (3000) then you can take the spark plugs out
firing order for 7mge & 7mgte is 1 5 3 6 2 4
If its a Tubro (7m-gte) then replace it with the turbo engine (7m-gte) If its non turbo, replace it with the non turbo. The Supras from 1986.5 to 1992 were all interchange able. In fact, the engines from the 79-86 Supras will bolt in as well, how ever they will not plug into your stock harness. The "M" series block is very very interchangeable. Also the 7m Series engine came in the Toyota Cressida of the same years....but only in non turbo form.
yes. you can swap them. they are the same engines. even the wiring harness is the same
7x8=56 ANSWER-56
-5(7m + 9) -7m
Um... What is an rv26 and why the HELL is it in a supra? Last I checked, Supra's came with either a 7m, a 1jz, or a 2jz. I would hope that a person with your extremely limited knowledge on engines would refrain from attempting an engine swap. BTW I believe the engine you're talking about, an RB26dett, is from a SKYLINE. Learn what the hell you speak of. Thanks.
7m
7m-5 = 9 7m = 9+5 7m = 14 m = 2