0
Add your answer:
Earn +20 pts
What are the tappet settings for 1998 vauxhall frontera 2.5 tds sport diesel?
They are hydraulic.
Where is the pollen filter located on a vauxhall frontera 2.2 dti 1998?
There is no cabin pollen filter on the 1998 2.2Dti Frontera.
Where is the diagnostic socket in a 1998 Vauxhall Frontera 2.2i?
the diagnostic soket should be under the coin holder in front of the gear stick
Torque settings 1998 sunfire GT wheel bearings?
184 pounds of torque
What are the cylinder head torque settings for a ford bantam 1300 leisure bakkie 1998?
The cylinder head torque settings are a list of parts in the torque sequence. It tells where everything is and can be found.
What are the ratings and certificates for Frontera Sur - 1998?
Frontera Sur - 1998 is rated/received certificates of: Argentina:16
What are the torque wrench settings for a 1998 Chev S-10 V6?
Every nut and bolt has a torque setting, need to know which one you are looking for.
What are the cylinder head torque settings for a ford bantam 1300?
what model is it because it vary from year to year for a 1998 model its 98NM. and re-torque after 5000Km to 100NM
What actors and actresses appeared in Mafia en la frontera - 1998?
The cast of Mafia en la frontera - 1998 includes: Ana Berumen
Is the cam belt on a vauxhall frontera b 1999 t reg a chain?
This is Not a chain Nor a belt if it is the 2.5TDS. This engine is timed using 'geared pulleys' just like a Gearbox. There is no requirement for adjustment or replacement of anything to do with timing. If it is anything other than this It will more than Likely be a chain if it's diesel or belt if it is the vauxhall petrol engine depending on the size of the engine. I have a 1998 2.5 TDS LWB Frontera which doesn't require either!
What are the cylinder head torque settings for BMW 520i 1998?
Oil bolt washers and threads lightly. stage 1: Torque all bolts to 30Nm stage 2: angle torque all bolts +90 degrees stage 3: angle torque all bolts +90 degrees
What are the head torque settings for a 1998 Range Rover 4.6?
You must use new bolts. Torque to 15 lb/ft then tighten each bolt another 90° then another90° starting in the center working your way out on each step
