0
Add your answer:
Earn +20 pts
What is a carrier plastic?
A carrier plastic is a disease in a human finger nail. It turns grey and then drops off.
Why does my stereo on 01 Honda Civic turns on and off while driving?
When an electrical component on a vehicle turns on and off when being driven there is usually a problem with its connection. Check the clip for the wire harness to see if there are any problems. The clip not be all the way in.
When you start your 91 civic for the first time in the morning your car turns on and chokes and turns off if you dont press the gas and also the engine sign is on What could this be?
Your cold start sensor could be at fault, get a new one
When does a triac turns off?
A triac turns off when the current flowing through it drops below the holding current level. This typically occurs when the voltage across the triac falls below the minimum holding voltage required to keep it in the conducting state.
Will a Header off a 96 Honda Civic fit your 94 civic?
yes
How do you adjust the emergency brakes on a 1988 Honda civic?
Behind the e-brake you may have an ash tray or a cover that pulls off, take it off and you will see a long screw with a bolt on it. Tigten the bolt as many turns as it needs. This should help.
92 Honda civic hatch your problem is everytime you turn the headlights on your gauge cluster light turns off?
check your fuse box you probly have some bad fuses or possibly in the wrong places
Will civic wheels off a 2005 fit a 1994 civic?
yes they if they are universal or Honda rims
Does a 94 Honda civic have a on-off switch for the airbags?
No, there is no on/off switch.
Why does my car only turns off when gas needle goes crazy and drops all the way down to empty?
Multiple problems could contribute but I would need more details such as does it turn off on it's own or when you turn it off the needle jumps then the car stops running.
When a mp3 turns on then shuts off what does that mean?
my mp3 turns on but does not go to menu just shows the symbol of the brand then turns off
At normal condition how does a compressor start and stop?
A pressure switch would activate the compressor's motor starter. When the pressure drops below a set 'low' limit, the motor powering the compressor turns on, when the pressure reaches a set 'upper' limit, the unit turns off...How's that for "Straight Forward"?
