0
44-78 in-lbs. Mazda manual recommends tightening the bolts in the following pattern (recommend lightly tightening each bolt in 3 cycles):
- Center bolt between 2nd and 3rd spark plug.
- Center bolt in front of spark plug #1.
- 4 bolts down the driver's side, starting from front to back (timing belt to firewall)
- Center bolt behind spark plug #4.
- 4 bolts down passenger's side starting from back to front (firewall to timing belt)
- Center bolt in front of spark plug #1.
- Center bolt between 2nd and 3rd spark plug.
- Center bolt behind spark plug #4.
Add your answer:
Earn +20 pts
What is the valve cover torque settings for 1993 Mazda mx6 v6?
5 foot lbs
What is the valve cover torque on a 2000 Mazda Protege 1.8L?
The 2000 Mazda 1.8 liter engine valve cover torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
What are the torque specs for a 94 sc2 valve cover gasket?
89inch pounds is the torque rating for the valve cover bolts
What are the rocker cover torque settings of a fiat punto?
8-10Nm
Does anyone have torque specs for your 1986 Nissan 300zx thermostat cover bolts?
The bolts have a number on it, what is the number? There is a general torque spec in the shop manual that will say what the torque is based on that number
What is the torque and tightening sequence for the valve cover gasket for a 1992 for tempo 4 cylinder?
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
What is the clutch cover bolts torque Specification on a 2001 Ford F-150 XL?
35 ~ 46 Foot pounds of torque. Pressure plate bolts.
Harley 883 torque setting?
Torque settings for the 11 screws that secure the transmission cover on an 08 sportster
What is the manufactured torque spec on a valve cover when tightening the bolts on 2001 FORD expedition?
Tighten the valve cover retaining bolts in sequence, torque them to 71-106 inch lbs. (8-12 Nm).
What is the torque on valve cover bolts for a 1998 Plymouth neon?
105 in lbs
Torque specs valve cover bolts 1998 accord?
7.2ft lbs
What is torque pressure for the valve cover bolts on a 1998 Hyundai Accent?
72in-lbs
