This is how to program a Mazda Protege keyless (also works with other Mazda models) remote system:
1. Open Drivers door and leave open.
2. Lock and unlock the drivers door using the power lock switch on door panel.
(not sure if this is required)
3. Insert key into the ignition.
4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined)
5. Open and close drivers door 3 times ending with door in the open position.
(you can depress the door switch instead)
6. Door locks should respond by locking and unlocking.
7. Press any button on remote 2 times. Doors should lock and unlock.
8. If programming a second remote press any button 2 times on it and door locks should cycle again.
9. Remove key from ignition and door locks will cycle again.
10. Test remotes.
This information was received from:
How do you program a keyless entry remote for your Mazda 5
You have to take it to a Mazda Dealership or locksmith.
No, the only features on the 2006 Mazda 3 Keyless Entry Remote is Lock, Unlock, and Panic.
You need one of these: http://en.wikipedia.org/wiki/Amstrad_CPC_664
Were is the egr on a 1992 mazda protege
where is the thermostat on a 1999 mazda protege?
On your keyless remote.On your keyless remote.
Where is the thermostat location on mazda protege 2003?
Where is the headlight relay in 1992 Mazda Protege?"
Where is the igniyion coil on a2002 mazda protege
Every 60,000 miles in a 93 Mazda Protege
Yes the 1994 Mazda Protege is a OBD 1 port
How do i you program keyless remote for a 2004 malibu?