0
dirt deposits on the lifters. i have heard using mobil 1 synthetic will fix this problem. You may also want to consider a having a engine flush done. I had this problem with the v6 in my 97 Rodeo with 135k miles; solved the problem for me. price was reasonable.
Add your answer:
Earn +20 pts
1998 Isuzu rodeo 3.2 engine knock sensor location?
The knock sensor is located on top of the engine block underneath the intake.
1998 Isuzu rodeo 3.2 code po327 low input how to fix. check engine lite on?
Knock sensor needs to be replace
Where is the knock sensor in a Isuzu I290?
The knock sesor is located, on your Isuzu 1290, at the front of the engine. The sensor screws into the engine. Wires connect the sensor to the senor light.
Does the engine on a 2003 impala knock in the top of the motor if the knock sensor is bad?
The knock sensor just advances and retards the engine timing only. If there is a noise in the engine then you have engine are valve train problems. The knock sensor will not make the engine knock.
How does a modern engine management with a knock control system react to engine knock?
This is controlled by a knock sensor.
Why does your engine knock?
I have a recent engine knock on my 91 escort started out intermittant. I have a recent engine knock on my 91 escort started out intermittant.
Why is your engine knocking on BMW745?
knocking as in spark knock? or engine knock? spark knock is adjusted through a knock sensor via ignition timing. eng. knock is due to brg. knock as in low oil pressure or sluge in engine or just a tired motor
Does the engine knock with a bad knock sensor?
NO it will not. If you have a knocking sound then you have trouble inside of the engine.
What might make my 1998 Isuzu amigo 3.2 motor knock when i engine runs at 2000 rpm's?
My sister moter just blew up it had no aor low oil and that's what it did is knock so check your oil when car is off and cold and on flat ground best luck
What are the knock senors for on a 2004 Chevy truck 4x4?
Severe spark knock (pinging) can damage the engine. Knock sensors detect spark knock (pinging) in the engine. They send that info to the ECM (Engine Control Module). The ECM makes temporary adjustments in engine timing to eliminate the spark knock.
Would the knock sensor stop the engine from starting?
No. It only senses engine vibration/knock.
Will a bad knock sensor prevent an engine from shifting?
A bad knock sensor would illuminate the check engine light and allow the engine to ping (spark knock). The engine doesn't shift, the transmission shifts.
