0
Add your answer:
Earn +20 pts
Can a 1998 Acura Integra automatic transmission fit in a 1991 Acura Integra?
it will fit but you need to convert it to a cable clutch because the 98's are hydraulic
How do you change a clutch cable on a 1998 integra?
You don't. There is not a clutch cable on a 1998 integra. It has a hydraulic clutch.
Will a 98 Acura Integra manual transmission bolt up to a 92 model integra?
Yes, with one exception: the 92 Integra comes with a cable actuated clutch, the 98 a hydraulic actuated clutch. Hasport may have a cable to hydraulic converter kit.
Will a1998 Acura Integra clutch system work in a 1990 Acura Integra?
nope don't believe so, 98 runs on hydro tranny and 90 runs with cable tranny..
Your 1990 Acura Integra will not start?
Check your negative cable to the battery.
Will a 1994 Acura Integra gsr manual transmission fit a 1990 Acura Integra ls?
No, 90-93 was cable operated, 94-up was hydraulic.
Where is the starter on a 1988 Acura Integra rs?
You can find your 1988 Acura Integra starter on the right hand side of the engine. You can follow the positive battery cable directly to the starter.
Will a 1994 integra engine and transmission fit into a 1990 civic?
with modifications and a mounting kit, and a way to convert cable clutch pedal to operate the hydraulic clutch transmissionhasport.com
Where is the started located on an Acura integra?
The starter is located on the back of the engine, near the bottom. You can follow the positive cable from the battery directly to the starter.
How to replace clutch 1989 Acura Legend?
In order to replace a clutch on 1989 Acura Legend, you would have to remove the old one. You will do this by removing the jam nut that holds the pedal and disconnecting it from the throttle cable and replace it with a new one.Ê
How do if fix the hood release on your 95 Acura Integra?
The hood release cable is held in place by a retaining nut on each end of the cable. Remove the retaining nuts and the cable placement retainers. Reverse the process to install the new hood release cable.
How do you replace a speedometer cable on a 1990 acura integra?
Start by removing the gauge cluster, unhook the speedometer cable from back of cluster. Pull speedo cable thru the firewall, follow it down to the transmission, and then unhook it. Install in reverse order of removal.
