you take the top off then take the piston with the shaft out and put new rings lol its easy im 11.
it either needs new rings on pistios or one piston is cracked causing blow by or ... blow by is when compression escapes your piston..
You don't. The only solution to damaged piston rings is to take the engine block out of the car and replace the rings.
How much does a car cost?
you bring it to a shop
you don't fix piston rings. if you have bad rings you have to pull the piston and replace them. on most vehicles you have to pull the engine, then you take off the heads and oil pan. unbolt the caps from the bottom of the rod and push it out the top.
If you are mechanically inclined it is cheaper to replace the entire engine
with new ones
The piston rings create a seal between the piston and the cylinder wall.
http://www.lings.com http://www.Cmsnl.com Lings have the pistons and rings, pistons are 9 pounds and rings are 37 pounds
There's no point in replacing the piston rings. You have to completely remove and disassemble the engine in order to reach the rings. In light of the fact that you didn't know this, you should have the ENGINE replaced by a qualified technician.
Yes, just be careful not to scratch the crank journals with the studs on the piston rod.