It is a pain in the back side! you have to remove the fan first then when you find the two bolts getting them out is the easy part, puting it back in is the HARD PART. First I would get the good gasket, that helps a bit but the Thermostat fits in the hose end and the back end fits into the engine. becouse of this DUMB *** design keeping the THerm still as you try to line up the bolt holes is next to impossable. It takes about an hr to to a 5 min job, two if you never changed it before. Have fun
Wiring diagram for 96 Mazda b2300
What is color for hot wire on a 1996 mazda b2300 truck for radio
Where exactly it the fuel filter located on my 1996 Mazda protege 1.5 motor.
The proper oil type is important to keep a vehicle running correctly. 5w-20 oil is the oil that a 1996 Mazda b2300 uses.
It holds either 19 or 20 gallons.
I have a 1997 B2300 with 100,000 miles on it and am going to do replace the timing belt this weekend (2/10) I have the Haynes manual, read through it, and the parts. I'll let you know how it turns out on Monday.
20w 50 dude!
start with checking the coil packs wires sparkplugs
it is inside of the gas tank,you have to drop gas tank.
it is located onder the car.
look under the alternator 1 inch and then to your right 2 inches. more or less.....
If it has a 4.0L V6 then it has an 8.8 (size of ring gear) if it has anything less of a motor it will be the 7.5 inch.