To program a Mazda # remote first open the driver car door and leave open, then lock and Unlock the drivers door using the power door lock switch on the door. Put your key into the ignition and turn it on then off and repeat this 3 times in 10 seconds. Leaving the key in the off position, open and close your driver's side door 3 times, and leave door open. You should hear a locking and unlocking once then press #1 on remote and doors should lock and unlock.
Put the key in the lock and turn it to unlock the door.
put ignition key into driver's door to unlock postion.
Use the handle.
With a key my friend
For *Automatic Door Lock* see page 2-12 of your "Owner's Manual". For *Auto Door Unlock* see page 3-61. For the *Remote Door Lock & Unlock* functions see page 3-62.....
Follow in order: -remove key from steering column -close all doors -open driver door -insert key in steering lock -repeat the following 3 times in 24 secs: -turn key to on then back to lock -push driver side door switch 3 times -check that door lock and unlocks-if not wait 40 secs -if lock and unlock-push any button twice -check that door locks and unlocks-if not push driver side door switch -if lock and unlock-push any button twice -check that door locks and unlocks-if not push driver side door switch -if lock and unlock-push any button twice -check that door locks and unlocks-if not push driver switch -if lock and unlock-the end. -remote should work after this.
This is how to program a Mazda protege keyless (also works with other Mazda models) remote system: 1. Open Drivers door and leave open. 2. Lock and unlock the drivers door using the power lock switch on door panel. (not sure if this is required) 3. Insert key into the ignition. 4. Turn key to the ON and OFF position 3 times in 10 seconds. Leave key in ignition. ( i have seen others say 24 seconds for 4 & 5 combined) 5. Open and close drivers door 3 times ending with door in the open position. (you can depress the door switch instead) 6. Door locks should respond by locking and unlocking. 7. Press any button on remote 2 times. Doors should lock and unlock. 8. If programming a second remote press any button 2 times on it and door locks should cycle again. 9. Remove key from ignition and door locks will cycle again. 10. Test remotes. This information was received from: How do you program a keyless entry remote for your Mazda 5
how do you unlock the door under the hay
No, the only features on the 2006 Mazda 3 Keyless Entry Remote is Lock, Unlock, and Panic.
Could the condition be caused by using the remote locking while still inside the auto?
On my ( 1995 ) Ford Explorer XLT the power door lock relays ( 3 relays ) are in with the tire jack , behind the removable plastic panel on the drivers side of the cargo area . I assume your 2000 would be the same . There are ( 3 ) relays : - all door lock - all door unlock - drivers door unlock