yes as long it was weird to the ignition so when the button is push it would start the car just like turn the key
you press the button start
If you are referring to push button start almost every manufacture sells cars with this feature.
1912 Cadillac
There is a reset button on the passenger side under the dash. Turn the ignigion on but don't start the car. Press and hold the reset button for about 5-15 seconds. Turn off ignigion and turn back on. It should reset then. If not, push the button with the ignition off and then turn the car on after the 15 seconds.
Turn your car on and change the odometer display to the total actual milages driven. Turn the car off. Push in the reset button of the odometer at the same time you push in the keyless button without pushing the brake pedal (this will turn on all the car systems, but not the car). Hold both buttons in (the odometer and the keyless system) for a few seconds and the warning light will turn off.
Try to look under the dash for the brain and find a push-button switch. On most directed electronic alarm's its a black button. If found...open the drivers door, put the key in the ignition and turn to the "On/Run" position and push that button once and then wait about 5 seconds and the alarm should turn off Try to look under the dash for the brain and find a push-button switch. On most directed electronic alarm's its a black button. If found...open the drivers door, put the key in the ignition and turn to the "On/Run" position and push that button once and then wait about 5 seconds and the alarm should turn off Try to look under the dash for the brain and find a push-button switch. On most directed electronic alarm's its a black button. If found...open the drivers door, put the key in the ignition and turn to the "On/Run" position and push that button once and then wait about 5 seconds and the alarm should turn off
Push the flasher button. It will have a triangle symbol on it.Push the flasher button. It will have a triangle symbol on it.
Yes, on almost all modern cars the brake must be applied in order to start the engine. This is a safety feature.
Push the clutch all the way to the floor, and turn the key to start it.
You push the ETC button again to turn it off.
Yes, you must turn on the ignition.