Did one last weekend. Both cams have a line the lines up with marks on the valve cover. Basicly the marks on the cams both are set to point to twelve o'clock. The mark on the crank shaft pully points to 6 o'clock or strait down. Hope this helps. If you are not in a hurry I could draw you a picture or send a photo if you are more patient. I have to tear into it again to replace a cam shaft sensor. Good luck. Be careful, if you get off you'll smash up the valves as the Leganza is an interferance engine.
look at how to set timing mark for 99 daewoo,explained it there
the two cams must be at 12oclock and the crank must be at 6oclock
The timing marks on your Isuzu 4hf1 engine can be set by looking at the timing marks on the timing belt pulley. The timing belt marks are facing towards the front of the automobile.
You can set the camshaft timing on your automobile by lining up the timing marks. There will be timing marks on the front main pulley and timing marks on the camshaft.
The timing marks on your Isuzu 4hf1 engine can be set by looking at the timing marks on the timing belt pulley. The timing belt marks are facing towards the front of the automobile.
you dont its preset by the timing belt
how to set the timing marks on a 1995 Mitsubishi Montero
When you set to do this on your own, it is critical that you get it right from the beginning, or you risk destroying your engine. The most important thing is to ensure that all the marks on the gears align correctly with the corresponding marks on the timing belt. Wind the engine over by hand to ensure the marks on both sides align properly, before you replace the covers.
Line up the timing marks on both camshaft sprockets so that they face each other. And line up the crankshaft pulley mark with the mark on the engine block.
1998 and newer have no timing marks. Timing cannot be adjusted.
timing marks dodge 2.2 engine how to set them
http://www.justanswer.com/questions/2d6n5-set-timing-marks-Nissan-qg-9