To set timing correctly on a 1992 Honda Civic the distributor must be installed at the right angle. Install the distributor at the correct degrees to ensure the timing is set properly.
go to auto zone and ask for timing diagram for your civic,they will give you step by step instructions for free,i know because i had to do this for my 92 civic,
The timing on a 1999 Honda Civic can be adjusted setting the distributor to the correct angle. Setting the distributor forward to much will mess with original settings of the ignition.
Is the crank pully bolt on a 1993 civic 1.6 litre left or right handed thread???
93 civic has a timing belt... if its dual overhead cams, it is nessecary to find the timing marks.. set them properly to their marks as well as the crankshaft. once these are properly set slip your timing belt on and then find the mark for your idler pulley.. reinstall everything and drive away
Timing on a single-cam 1998 Honda Civic is marked on the cam shaft. The distributor will also need to be set of the appropriate degrees.
I have a 1998 honda 300ex that needs the timing set how do i do that
The water pump is located in the timing set up behind the timing cover its a good idea to replace the timing belt when u replace the water pump
How to set timing on 1984 Honda 200s 3wheeler
Base ignition timing for any car should always be set according to the information found on the manufacturers emissions information label, affixed to the underside of the hood. Should this information/sticker not be present, a 1991 Civic DX with D15 engine uses 14* BTDC static ignition timing. It is best to use a dial-back type timing light in-lieu of relying on the marks on the crank pulley.
How to set the distributor in a 1995 Honda civic
Timing is set by the ECU.