0
Add your answer:
Earn +20 pts
How do I reset Maintenance Required Light 2008 Toyota Highlander?
On the 08 highlander make sure that your ODO display is on trip A then turn off your key, hold down the trip reset button and with your other hand turn the car to on. the display will flash to a series of either 0's or dashes, they will then countdown to nothing. When the display goes blank the reminder is reset. Since it is reset now do not rely on it for a monitor since it will come on 5k after being reset.
How do you reset check engine light after an oil change on a Toyota Highlander?
For the 2008 & 2009 Toyota Highlander with push button start:1. With engine on, set odometer to trip A, with odometer reset stick on the instrument panel.2. Turn off engine3. With foot off the brake, push the odometer reset stick, and hold it in, while pressing the engine start button. You will see nothing as yet.4. With the odometer reset stick still in, and your foot off the brake, push the engine start button a second time. You will see the dash board lights go on, and the display screen display a message saying the maintenance reminder has been reset.If this does not work, check with a local Auto Zone or similar auto shop or check the Toyota website.
How do you reset oil change light on Toyota Highlander 2012?
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
Is there a reset for the display screen on a Motorola cell phone?
Nooo
How do you reset oil change light on Toyota Highlander 2009?
Press the start/stop engine button on the dash to display the odometer and then press the odometer button UNTIL TRIP A IS DISPLAYED, and WITHOUT pressing the brake pedal, PRESS THE start/stop button THREE [3] TIMES while continuiously holding the odometer button until display on the screen says COMPLETE. YOU'RE DONE!
Where is the reset button on 2004 Toyota Highlander?
If you're looking for an inertia switch for the fuel pump, it doesn't have one.
Why is it that when you put a door glass in a 2005 Toyota Highlander it goes up to the top then halfway back down?
You have to reset the computer
How do you reset the average mpg display on a Toyota Corolla?
on my 2010 - push and hold the button
How do you reset your iMacs screen display?
Click System Preferences. Now click Display. Click Best for built-in display or click Scaled and set it to the resolution you prefer.
How do you reset the check engine light in a Toyota Highlander?
Go call the Toyota car company or headquarters and ask the people who made the car.
How do you fix a monitor screen display that is wide or stretched on the center and narrow or squashed or squeezed on the edges?
You need to reset the screen by pressing the button on your LCD monitor.
How do you reset oil maint on display of 2009 Toyota Highlander?
with vehicle on to ensure you are in "Trip A" on your Odometer reading you then turn the vehicle off. Now, with you foot OFF the brake push in the Odometer reset button and hold it while at the same time push the power button twice. You should see the maint. screen come on with dash lines that are in the process of resetting the message. When it is reset it will say "complete". Remember, to NOT have your foot on the brake at this time. It's just like turning on the accessories in the car but first be in "Trip A"/turn off vehicle/then (no foot on brake) push the ODO button (keep it pushed)/then push PWR button twice and the reading will come on that it is resetting. Yes, I repeated myself but wanted to make sure no one had to go through what I did to get it reset. Hope this helps. **Sorry, this advice above doesn't work. I just tried to reset my display screen using these steps, but it doesn't work. Can anyone post a valid answer?
