Want this question answered?
press the reset and select switch at same, turn ign. key to II (On) and wait 10 seconds
reminder to change oil you can reset it by inserting your key its actually pretty useless
Press and hold the select AND reset buttons at the same time. Turn ignition switch to on and wait maybe 10 seconds until the maintenance light goes out.
reset switch by Honda or acura part number 07paz-oo10100
Not quite sure how to do it manually, but if you spend the extra couple of dollars to go to a Acura dealer they will reset all the warning lights on the vehicle.
How to reset maintenace light on 1999 acura t l 3.2
Depending on the mileage on the car, there are some maintenance requirements to be done by you, or the car dealer. The maintenance light will stay "on" until these maintenace issues are completed. Your owner's manual also tells you how to reset the maintenance light, and outlines the maintenance required per the mileage on the car.
To reset Maintenance light, switch key to on position, do not start. Press select and reset buttons at same time for about 15 to 20 seconds, then switch key off. If reset occured, the light will go off when you restart engine. If not, repeat process. Took three time for me.
You have to reset it.Procedure is in your owners manual. You put in key and turn it but do not start engine and then push in trip/odometer and reset it back to zero it seems or something similar.
To give you the required instructions to reset the maintenance interval the chassi number is required.
i dont know how
Take it to a mechanic or the dealer and pay 45 bucks. Or use the reset button on the right of the steering wheel like you use to fix after you get a oil change. Hold reset for 10 seconds. Read your manual!