To manually reset the maintenance required light on a 2012 Toyota RAV4, first turn the key to the On position. Next, press the trip button meter until it gets to the Trip A odometer. Now, switch the key to the Off position. The next step is to hold down the trip meter and turn the key back to the On position. You'll see four blinking dashes that will start to disappear one at a time. When the last dash goes away, it will show 000000. This means the maintenance counter is now reset.
maintenance with engine
disconnect the battery
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
You will need to take it into a mechanic. They will be able to check out your vehicle and then they can turn off the light.
Your drivers manual should give you the information to reset the oil maintenance light.
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
How do you reset maint read light on 2010 corolla
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
Check engine light or required maintenance light. Procedure for resetting required maintenance light just answered. Check engine light requires an OBD II to determine problem and turn the light off.
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
How do you reset maintenance reminder light on 2008 Toyota corolla? For what it is worth: To reset the Maintenance Required light on my 2007 Toyota Corolla: 1) Set your trip meter to the odometer setting (in other words, not Trip A or Trip B) 2) Hold down trip meter reset button and turn ignition to off. 3) While holding down the trip meter reset button now turn the ignition to on. 4) Keep holding down button until Maintenance Required light shuts off. Note: One some other Toyota models you hold down the Trip A meter rather than the odometer. Hope this works for you.