I assume you mean the service indicator light. If not, I apologize & these instructions may not help you.
Your post doesn't specify what year model you have, but the procedure for turning off the indicator light on the 2004 model is found on Page 59 of the Owner's Manual (in the Instrument Panel section, under Maintenance Required Indicator).
1) Turn off the engine
2) Press & hold the Select/Reset button on the instrument panel (the bar-type button to the bottom right of the speedometer), then turn the ignition switch to on.
3) Continue to hold the button for about 10 seconds until the indicator light goes off.
Works like a charm on my 2004 model. Good luck!
It specifically explains the procedure in the owners manual. It is a simple procedure using the odometer reset button on the dashboard.Unless the owners manual explains it far better than the 2007 version the info is incorrect. I will be giving this reply a run in my 2007 later today. [[Q/How do you reset oil life indicator after changing the oil on a Honda CRV|http://wiki.answers.com/Q/How do you reset oil life indicator after changing the oil on a Honda CRV]]. The CRV owner manuals are missing the step towards the end of pressing the button 1x until and all items will start to blink; then you press and hold the same button until Oil Life resets to 100% (usually 5 seconds)
How do you reset the service indicator on 2007 Mercedes vito
I have a 2007 and I have to push the trip button until the oil life indicator shows. Once it does I have to push and hold the button until it says reset.
how do i get a code for my 2007 honda odyssey 2007 if i have the serial for the radio
with the dealer computer.
Exactly the same as the 2008.
Turn ignition on,need not running.Hold the reset button in until oil life xxx% blinking ,let go the button.Then hold it in again until it shows oil life 100%.
You reset it with an OBD2 scan tool.
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
mercedes benz vito 111 service reset
Turn off the engine. Press and hold the select/reset button in the instrument panel, then turn the ignition switch ON (II). Hold the button until the indicator resets (approximately ten seconds).