In the manual it says to turn the ignition key, then press (or pull) the switch that controls the dimming on the display panel. This is what worked for me. I just read the manual.
To reset the ECU you need to locate the ECU backup fuse located in the under hood fuse box and pull it for about a minute and then put it back. Alternately, get a 10mm and disconnect the battery for about ten minutes.
How do you turn off the check engine light on a 2001 honda accord?
To reset the check engine light on a 1998 Honda Civic located the blue 15 amp fuse in the engine bay fuse box. The fuse is labeled ECU, and will reset the check engine light when removed.
One way to reset a 2005 Honda Element check engine light is to disconnect the battery. The battery will need to be disconnected for about 5 minutes for the light to reset.
You can reset the check engine light on a 2005 Honda Pilot by disconnecting the battery for a few minutes. If it comes back on, you need to take it to have it checked or reset by a mechanic.
You can reset the 2004 Honda Accord check engine light by removing the instrument light fuse. The location of the fuse can be found on the inside cover of the fuse box.
Light can only be reset by the use of diagnostic equipment.
You reset it with an OBD2 scan tool.
The check engine light on a 2003 Honda Accord will be triggered when something on the engine is malfunctioning. To rid the check engine a light the ECU will need to be reset.
A 2000 Honda Accord check engine light will stay on if the ECU is not reset. To reset the light remove the ECU fuse from the engine bay fuse box. Reinsert it after 5 seconds.
Check engine lights alert drivers of immediate need on any mechanical issues that need to be cared for. After issues have been cleared the check engine will need to be reset. To reset the check engine light in a 2002 Honda Civic simply unplug the battery for five seconds.
The check engine light on a 2004 Honda Civic can be reset by unplugging the ECU fuse in the engine bay fuse box. The ECU fuse is located is blue and rated at 15 amps.
You can reset it with your OBD reader or you can disconnect the negative battery cable for a couple of minutes to reset the check engine light.