If you look straight up inside the bumper you will see the plug that holds the bulb just twist and it will come out
FOR 99' ES300 MODELS: You do not have to do the things mentioned above. The process is much easier and simpler. No need to even open the hood. All you have to do is pull the whole turn signal assembly forward. NOTE: It is important that you do NOT pull it sideways or even at an angle for it might break the plastic clip. There is only one clip holding the assembly from the frame. To start, use a screw driver or similar and insert it in the farthest part of the signal light assembly from the front. Pry gently to move the assembly forward about an inch or two to completely unlatch the plastic clip that is holding it in place. This clip is located in the middle of the assembly. Then remove the assembly still attached by the wires. Twist the lamp holder out of it's socket to replace the busted light.
Read more: How_do_you_remove_front_lamp_assembly_on_a_Lexus_ES300-98_to_replace_turn_signal_bulb
you can replace it by taking it to the shop and they will do it for you.
Remove front passenger seat on Lexus es300?
If its the front turn signal you open your hood and partly remove the black plastic cover on top of your headlights. Then you should see a screw on that screws on your signal light. Remove the screw and take off the the signal light and then remove the bulb.
It is located under the exhaust headers, front and center.
how to change front brake pads on a 1994 lexus es300
look in your owner's manual
1998 Lexus ES300 turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
The starter for this model is located on the driver's side, at the front of the engine.
It should be right under the exhaust manifold and in front of the radiator. From the front view its in the middle of the engine.
The first thing to do when replacing a cigarette lighter on a 1995 Lexus ES300 is to remove the fuse for this from the fuse box and disconnect the battery. Then remove the clip on the back of the lighter and slide the metal part out the front. Insert the new metal liner and connect the rear clip. Place the fuse back in the fuse box and reconnect the battery.
i have a 95 es300 but it doesnt jerk when i change gears when i ride it jerks but i found out it was a motor mount front motor mount which will cost bout $112 to replace but if when you change gears it could be your transmission slipping that cant be goo but check your motor mounts first....
How do you Replace the timing bealt of lexus es 300 92 and a diagram?