You will have to pry off the lens CAREFULLY using a small screwdriver. There are two (or more) little plastic protrusions on each long side of the lens which fit into the casement. Look for very small slots along the side of the lens to insert the blade of the screwdriver. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.
To replace a light bulb, you have to: if its in the front, you have to open up the hood and look for the screws that are connected to the lights. For the back, you have to: open the trunk, and unscrew the light bulb, open it up and replace it.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
you go to the Toyota place
HERE IS THE LOCATION ,USE A SPANNER TO REPLACE IT. https://sites.google.com/site/autobestanswer/toyota
There is no light on the steering wheel.
Curb weight, 4178 lbs.
In the fuel tank.
how to replace dome light on ford f-450
Go to the TOYOTA dealer, They are sure to rip you off at $50. What else can you do?
with your hands ?
2008 1.6 petrol toyota avensis timing belt or chain ?
Well, honey, that little light on your Toyota dashboard is like a cry for help from your car. It's basically saying, "Hey, pay attention to me before things get ugly." So, go ahead and take your car to a mechanic to get it checked out before you end up stranded on the side of the road. Trust me, you don't want to be stuck with a hefty repair bill because you ignored that pesky little light.