If you are talking about where the manifold meets the heads that is a lot of work. If you are talking about where there are two flnges pretty easy. There are usually three bolts holding together. I would replace bolts, nuts, and washers if posibble. Just take the nuts off, then you need something big to pry bake the exhaust, a really big screwdriver works good. Remove your old gasket and clean the surface as best you can. Get a new gasket and use some silicone. I forget who makes it but when you go to an auto parts store they make a bunch of different types of silicone. This one is copper, it looks orange and has to be high temperature. Apply this stuff to bith sides of gasket, reinstall. Install bolts and tighten. Let sit for a little while.
how to change head gasket on 1997 acura
replace the head gasket
It is not possible to repair the actual head gasket. Repair of a blown head gasket is to replace the gasket.
you go to a Machanic.
Head Gasket to replace
The gasket for a 1997 pickup was around $40.00-$50.00, if i remember right and that was at NAPA.
The cost to replace a head gasket in a 1997 Buick Park Avenue ranges from $20 to $180+. This varies based on brand, store and labor costs.
Remove the cylinder had from your 1997 Chevy Astro engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
How much should it cost to replace a blown head gasket for a 197 BMW 528I
The gasket set is $55.00 The labor is $250.00
It is a 4L60E
The blower motor resistor pack is defective. Replace it.