answersLogoWhite

0


Best Answer

Loosen both bolts on the alternator will free up the belt. When putting on the new one make sure u get the belt real tight around the alternator, by pulling the it hard when tighten the alternator back up or will not charge the battery or the belt might to come off.

User Avatar

Wiki User

βˆ™ 16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace ac belt on 1992 subaru loyale?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the alternator on a 1990 Subaru Loyale?

Remove the wiring harness from your 1990 Subaru alternator. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install your new alternator.


How much does it cost to replace a timing belt on a 1992 Subaru Loyale?

Call a parts store and get a price the two timing belts. About 20 bucks in my area. Installed about $150.-300 depending on repair facility and additional parts required in procedure,(seals,water pump,drive belts,etc..)


How to replace Serpentine belt on 1992 grand AM 2.3 l?

how to replace a serpentine belt on 1992 grand am 2.3l


When do you replace the timing belt on a 2002 Subaru Outback?

105,000 miles


How do you replace timing belt on 1990 Subaru legacy ls?

with your hands...


Where is water pump on 1998 Subaru?

On a 2.5 liter engine it is located behind the timing belt cover.My advise, replace the timing belt when you replace the timing belt. It will have to come off anyway.


How do you replace a timing belt on a 1992 Acura Vigor 2.5L?

HOW TO REPLACE A TIMING BELT ON A 1992 ACURA VIGOR? how do you change a timing belt on a 1992 acura vigor 2.5l how do you change a timing belt on a 1992 acura vigor 2.5l -------------------------------- See article at the Acura Vigor Club -- Related Links (below).


Replace the timing belt on a 1992 Mazda MPV?

Replace the belt every 60,000 miles. Warning: This is an interference engine.


How do you replace the timing belt on a 2001 Subaru Legacy GT?

Replacing the timing belt is a complicated procedure that is impossible to describe in this small space. The engine in your Subaru is an INTERFERENCE engine. As such if they belt is installed incorrectly and you start the engine you will do damage. I suggest you purchase Haynes or Chiltons repair manual for your car. It will describe in detail with photos how to replace the cam belt.


How do you replace the water pump and the timing belt on a '99 Subaru Impreza 2.5 rs?

Get a manual on your car from AUTOBOOKSONLINE.COM.


How do you replace a timing belt on a 1992 Subaru SVX?

Remove electric fans Remove timing belt covers Get belt from Subaru (don't use aftermarket belts) Line marks on belt up with marks on crank and cam pulleys Turn engine over by hand two rotations Make sure marks still line up Reassemble While you're in there, good idea to replace the cam and crank seals It's not an easy job, and is best left to a qualified certified Subaru techncian unless you are mechanically inclined (I'd recommend at least getting an owner's workshop manual before attempting it) For a more in-depth guide, see www.subaru-svx.net


How much time on average is to replace the timing chain on a 1992 Chevy Corsica?

It will take an experience mechanic approximately 8 hours to replace the timing belt in your 1992 Chevy Corsica. The 1992 Chevy Corsica does not have each timing chain, it has a timing belt.