You have to replace the whole drive shaft.
front drive shaft, how do you get the yoke out of the transfore case to replace the ceal?
In some Honda's, you have to pull the axle shaft in. That may mean some disassmbly of the front end.
The front axles do not have a removable shaft, you must replace axles completly.
drive universal jount
1: disconnect the drive shaft from the rear axle. 2: disconnect the front shaft from the transmission (tedious and you need the correct size tool). 3: disassemble the front shaft from the main shaft by pulling them apart from the center or in front of the support and drop the main shaft. 5: remove bolts holding the support and drop and remove the front shaft shaft with the support still connected. 6: remove and replace the support with a wheel puller. 7: replace support with new part. 8: reassemble in reverse. CDARCO
I have a leak on my drive shaft left front 2000 cheve Blazer I would like to replace the whole unit
Honda quad had no vin plate the number is stamped on a plate in front of the steering shaft
No, the CR-V is designed as a front wheel drive vehicle.
How do u replace the front axel on a 1997 nissan altima
Listen to your father: go to the nearest public library and get a Honda manual--it will describe everything in detail!
Remove 2 small u-bolts from rear end yoke Pry drive shaft out of yoke Slide front end of drive shaft off front splines