Parking brake on
remove 5 screws holding windshield. remove whole headlight assembly. take flash light and look in headlight opening and find 4 nuts holding fairing to mounting brackets-2 nuts per side.. remove nuts. then remove your light bar-2 bolts per side..disconnect harness for light bar from inside fairing..remove fairing
Remove the two screws. Then remove the light housing. The bulb is right there, pull it out. Cheers
remove panel from inside door. remove bolts holding brackets at the side then the top, have a few people help support the door as you lift it free.
just yank on it!
To fix a license plate light on a 1995 Dodge Colt you must first remove the screws holding the light cover in place. Remove the light from the bumper completely. Remove the license plate light bulb from its socket and replace with a new bulb. Place the light assembly back in its place in the bumper. Secure the light assembly in place with the screws you removed.
you have to remove it from the outside.after you remove the screws press the bulb and turn it to the left to remove.
you remove plastic red/white cover with 2 screws and remove bulbs.
Yes, the 1995 tube stock is a screechy version of the 1996 tube stock.
Need to see diagram so i can remove or fix tail light on Chevrolet cavalier 1995
take a baseball bat and smash the light with it.
behind the farthest black button on the left is a screw, to remove get a screwdriver and pry it out.. also behind ashtray is 2 screws