There are bolts in between the seats (where the top and bottom meet) take those out and presto the seat can be removed plus you get a tip from all the people who lost change in the back too!
Start with the bottom seat there will be two horse shoe shaped bolts located on the bottom side of the seat pull straight up or cut off with a pair of bolt cutters.
NEXT: lower the center arm on the back seat, pull the cover toards you, remove those two bolts, remove two screws towards the bottom of the seat next to eaither door located by the seat belts.
NEXT: pull the bottom of the seat slightly towards the front of the car and up and you got it!!! out!!!
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
You need to do a lot if it is like my 1995. You need to remove the back seat remove the back of the back seat remove the screws holding the rear deck.. where the speakers are. then remove the screwss... what a pain.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
how do I remove the front seat from a 1991 fatboy
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The fuel pump is accessible by removing a service panel located under the rear seat.
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.