In a 2009 matiz you must gently pop out the housing (silver) from above the heating controls all the way up to the dials. It is one piece. Start at the bottom and move gently upwards. When this is done you will see the screws to remove both left and right. There are brackets screwed into the sides of the head unit which you will need to remove also. If you want to replace with a different model the bad news is you will need a new housing and cable adaptor (from halfords for about £12). Its a pain in the backside but can be done. Once you have the new parts, follow your common sense and then gently replace the housing from the top first and then applying equal pressure all the way down until it clicks fully in. Hope this helps, wish I had found an answer before I started! :)
remove and replace
remove timing cover
Remove the decorative radio cover. Remove the radio retaining screws. Slide the radio out. Remove the wiring harness from the back of the radio.
Remove the decorative radio retaining plate. Remove the radio retaining screws. Remove the wiring harness, from the back of the radio.
Remove the decorative cover from your Cadillac Eldorado radio. Remove the radio retaining screws. The radio will slide out. Remove the wiring harness and the antenna cable from the back of the radio.
Remove the 1993 Toyota decorative radio cover in. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness.
Remove the decorative cover to the radio. Remove the radio retaining screws. Pull the radio out and remove the wiring harness. Remove the radio antenna cable. Reverse the process to install the new radio.
How do you remove a radio from a 190E?
Remove the cover from your 1986 Chevy Cavalier radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
remove radio out vauxhall vectra
Remove the decorative radio retaining plate. Remove the retaining screws. Pull the radio out. Remove the wiring harness. Remove the antenna cable.
Begin by removing the radio retaining cover. Remove the radio retaining screws. Slide the radio out. Remove the wiring harness and the antenna cable from the back of the radio.