How do you remove the backseat from a Honda Accord?

Answer 1

The back seat is divided into two separate sections, which are installed individually. The seat section removes easily, by lifting on the frontmost part. You may need to hit upward against the assembly a couple times to get it to come free, but once it's started, you can generally pull just pull the seat to the side and out. After getting the seat bottom out, there are generally some bolts that are exposed for removing the seat back. The difficulty of THAT task depends on whether or not you have fold down seats. Correct Answer: Depending on what year Accord you have, inside the trunk, unlatch and fold down the TOP half of the back seat. From inside the car, remove the rivet that holds the trunk floor cover to the seat half. Fold this back out of the way. Remove the 10 MM bolt from each side of the seat back. Remove the seat back. Remove the 10 MM bolt from the tab located at the left center rear of the bottom half of the back seat. Raise the back of the bottom half of the seat. Use a screwdriver to gently pry the the hooks free from the slots in the floor, at the front edge of the seat. Remove from vehicle.