2003 Nissan xterra supercharged replace front rotors
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
with a 14mm wrench
http://rkrenn.com/xterra/howto/bearing/bearing.htm This link get you past the pads, rotors all the way down to the bearings.
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
No only should be done when your pads are changed.
Jack up car, secure on jackstand, Remove wheel, remove two mounting bolts that secure the calipers. Slide calipers out of rotors and hang caliper in a way not to strain brake hose. Pull Rotors off and change for new ones. If you want to change pads, Remove two retaining bolts on the caliper that hold the pads, remove and replace them.
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub
To change front rotors on a xterra u have to remove the brake caliper and brake guard off the rotor and then remove the gold cap off the hub and unscrew the two screws holding the wheel bearing in then unscew the holding plate that holds the bearing remember which way the holding plate goes when taking off... then remove the hub and the rotor comes with it ... then the screws going around the hub on the out side remove theses and the rotor comes off .. but i also suggest repacking the wheel bearings and replacing brake pads pads with the new rotors ...
Remove the tire and wheel from your 1997 Mitsubishi Montero. Remove the brake shoe assembly. Tap on the rotors to loosen them. The rotors will slide off. Reverse the process to install your new rotors.
break them into pieces after drilling them and just slide them off.
Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.