Remove the plastic trim panels to the left and right of the stereo with your fingernails or something that will not scratch the plastic. This will reveal four holes on each side. At a Radioshack type store you can buy DIN removal tools. But for a Double Din stereo you will need to buy two such packages. The instructions come with the package.
screwdriver, and then pull hard enough to rip out the wires and then there you have it. the way to remove a stock stereo the theft version
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
I do not believe it is. I know the stock stereo from the 2006 Mazda 3 does not support mp3 cds.
According to my brother (who is a mechanic), The stock stereo in the protege requires radio removal tools (2 sets) to remove -- you can get them at just about any parts store. Just carefully remove the molding around the radio, insert the tools all the way and then pull them outward to release the clips. The radio should just slide out.
send this question next week I will be replacing the stock stereo this weekend if weather permits
Remove Stock Ford RadioCheck related link below
i currently have the same prob...to my understanging the stock stereo runs along with the dash lighting, so did you remove the stock stereo? also check fuses on the driver kick panel
You have to unscrew the center console and work your way up.
http://www.installdr.com/InstallDocs/Honda/PDF/466053.pdf
AnswerIt's located under the factory stereo in Premium sound models. Here's a link to show you where and how to remove it!Good Luck!-Shaun-
No remote wire on stock deck tap into igniton wire (yellow with black stripe) for 1999 ford rangers & Mazda B-series.
You must remove the front of the dash. Everything around the stereo. Very time consuming. Just remember where the parts and all the screws go when you go to put it back together. It is not that difficult. Good Luck.