I just did this two weeks ago. There are two bolts that hold the alternator in place. Also a wire harness needs to be unplugged from the side of the alternator. The hard part is getting the alternator out what you have loosened it. The only way to get the alternator out is to remove the brake master cylinder above it. You have to unscrew the two brakes lines carefully (they have very small threads and many times it is easy to strip the threads or round the heads of the screws). Once the brakes lines are removed, than undo the master cylinder and move it out of the way. The alternator can then be removed.
how do you replace an alternator on a 1990 integra
how to install a altinator on a 1991 acura integra
You can remove the governor on an acura integra by having the ecu chipped.
Yes, It will fit a 90-93
Hou much should it cost to replace an alternator for a 1988 acura integra Ls?
Remove the Oil Filter and remove the Alt. through there. It will take some twisting and turning to get it out and In but it'll work
same as for a 90'How_do_you_replace_the_alternator_on_a_1990_Acura_Integra
To get the alternator to fit out of the engine bay, you must remove the mounting brackets for the alternator as well. Once you remove the brackets, the alternator will fit out of the bottom of the engine bay. It will only fit out of the bottom, it will not come out through the top.
answer not for free.lol
do you want to know how to remove your alternator? i have a 1990 integrea too and this is how you remove it ... you have to remove your axle to get the alternator out ... i had the same problem before....... hopes this help you a bit ... i know it's a lot of work but that's the only way .........
a hammer
Yes