well, you pull the wheel out, you see a little screw on the brakedrum, you take it oul, then you need two bigger screws M8, you put them into the two holes you see. by screwing them, you will be able to take the brakedrum off. take the new one, put it back on, put the little screw back on, put the wheel back on and don`t forget to make sure it`s tight
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
THERE IS A THREADED HOLE IN THE DRUM,8MM METRIC I BELEIVE,THREAD THE BOLT IN AND USING A RATCHET TIGHTEN SLOWLY AND THE DRUM WILL POP OFF. JUST MAKE SURE THE PARKING BRAKE IS OFF AND BLOCK THE FRONT TIRES TO PREVENT THE VEHICLE FROM MOVING.
No, the drums can be cleaned with brake cleaner.No, the drums can be cleaned with brake cleaner.
If you are inexperienced, you should not be messing around with the brake drums.
New brake drums are broken in the first time you go for a drive usually.
brake drums should pull off if not rusted on.
Remove the drums and take them to an auto parts store that has a brake drum lathe.
It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.It is inside the rear brake drums. It is the part that pushes the brake shoes out against the drum.
Almost all Auto Parts stores and machine shops resurface rotors and brake drums.
i was wondering how to change rear brake drums for 1999 Chevy venture
Brake drums can not be cut. The shoes inside can be replaced.Only disc brakes(rotors) can cut.
You could have either 9 inch or 10 inch brake drums