0
REMOVAL
1. Disconnect negative battery cable at battery.
2. Drain cooling system.
3. Remove all drive belts.
4. Disconnect coolant hoses.
5. Remove mounting brackets attached to the water pump. This may include upper and lower alternator brackets.
6. Remove fan and pulley. It may be necessary to remove the fan shroud. If so, position rearward toward engine.
7. Remove pump attaching bolts and remove water pump. Pull pump straight out of block as you can damage the impeller removing some water pumps. INSTALLATION
1. Clean all gasket surfaces.
2. Apply 1/8 inch bead silicone sealer to water pump gasket surfaces.
3. Using new gaskets, install and tighten water pump.
4. Install remaining components. 5.0L & 5.7L Torque setting is 30 Ft. Lbs. for water pump bolts.
Add your answer:
Earn +20 pts
1984 Chevy truck a arms work on1965 Chevy truck?
no
Will a 1984 Chevy truck seat fit a 1980 Chevy?
YES.
What size transmission is in your 1984 Chevy truck?
It should be a 700R4
What is curb weight of 1984 Chevy c10 truck?
1900pounds
How do you install the fuel pump on a 1984 Chevy truck when the push rod falls out of the block?
Put a gob of wheel bearing grease on the push rod before you install it. It will stay up by itself long enough to get the new pump in.
What size are stock tires on a 1984 Chevy truck?
31/10.50/15
Will 4.3L S10 Chevy truck engine fit in 1984 4x4 2.8L truck?
no, they have different bellhousings and oil pans
Will 308 gears be ok in your Chevy truck?
they work fine in my 1984 3/4 ton Chevy with a 383 stroker.
How do you repair a loose and sloppy steering in a 1984 Chevy truck?
replace the worn parts.
Can 23 inch rims fit on a 1984 Chevy s10 pickup truck?
Yes.
Where can one find reviews about a 1984 Chevy C10 Custom Pickup Truck?
One can find reviews about a 1984 Chevy Custom Pickup Truck on Kijiji. On Kijiji, one can find reviews of almost anything, including big pickup trucks.
Are the rear brakes on a 1984 Chevrolet C-10 disk or drum?
The rear brakes on a 1984 Chevy truck are drum brakes.
