Actually I need to know how to access the motor, after the door panel is off there is still a sheet of metal covering access. Your best bet is a local dealer Honda / Acura or local part store for a remanufactured version of the motor. There is a couple bolts holding the window motor in the bolt directily into the sheet metal covering it. You can remove these then either just remove the motor itself(which i dont recomend unless you have a new one because there are alot of small parts such as springs) or disconect the pully system which runs through the motor for running you windows up and down.
The 1992 Acura Integra master window switch is interchangeable with other 1992 models. The master window switch was used in all 1991 through 1994 models.
how to install a altinator on a 1991 acura integra
a B18a1 motor w/142 hp and 127 pound of toque
wiper intermittent relay 1990 acura integra
Yes, It will fit a 90-93
The Parts you need for 1991 Acura Inegrahttp://www.autosparepartsusa.com/searchparts.aspx?make=58&made=Integra&year=1991
1,3,4,2
Yes.
not likely if your talking about 1991 as being the DA integra and the 1996 as being the DC2
The 1991 Acura Integra idle air control valve can be found on the firewall. The valve will be on the drivers side of the firewall.
The 1991 Acura Integra brake lamp number is 2057. See sources and related links below for a picture and more information.
An H22 or K20.