Want this question answered?
Be notified when an answer is posted
Chat with our AI personalities
I terminal on the selonoid, you need a switched 12V for auto choke
The electric choke wire connects to the electric choke assembly on the carburetor. It's a round, black plastic assembly that is on the side of a STOCK carburetor. There SHOULD be a connection on the "HOT" side of the coil that lets you connect the choke wire.
it connects to any positive(hot wire) terminal controlled by key.
It goes directly to the back of the top of the alternator.Easy
You would want a source that is live when the key is in the on position.
It connects to the back of the alternator towards the top.
Auto parts store Buy a 5 wire to 3 wire converter On_mitch
So far I've learned that the dark green wire connects to the PCM and the dark green/orange wire connects to the ASD (Auto Shut Down relay). Now to which terminals do they connect to on the alternator and how do you determine that?
there is one wire with a round connector, it goes on the lug, the other connectors are unique wire connectors and can only go one place, just match them up.
how do you connect the wire from the alternater to the starter?
Connect the sub woofer to the equalizer or amplifier. The positive wire will need to be connected to a power source. Connect the ground wire. Connect the auxiliary wire to the amplifier.
get a pice of wire set it to the cooling relay switch run it under the hood to the door get a switch from auto zone connect it and your done