Locate the spark plug wires running along the valve cover. Each plug wire terminates at a spark plug boot, which must be removed by firmly pulling up from the valve cover by it's base. Use a clean rag, shop towel, paper towel, or better yet, compressed air to remove any dirt or oil from the spark plug and it's surrounding area. This is to prevent contaminates from entering the cylinder when the spark plug is removed. Using a socket designed for spark plugs (contains a rubber insert for holding the plug in the socket), a 4 to 6 inch socket extension, and a ratchet, remove the spark plug by turning it counter-clockwise (righty-tighty, lefty loosy). Place the new plug into the socket, and gently start the threads by hand. CAREFUL! If excessive resistance while threading the plug is felt, STOP and carefully remove the plug. Center the plug perfectly above and parallel the plug hole, and try again. Crossthreading a plug will generally mean removing the cylinder head and taking it to a machine shop for repair! Once plug is properly threaded, tighten to specified torque value (found in repair manual), or just go with "good'n'tight". Repeat for each spark plug, and reinstall spark plug boots and wires.
Yes, six.
To change the spark plugs in a 1997 astro van do I have to change the spark plugs from the bottom of the engine/
Where are the spark plugs located on a 1997 jetta gl
With a Spark plug Wrench
This is a Honda only code which means you have a random cylinder misfire. If you have not replaced the Spark Plugs & Wires, do so now. Use OEM spark plugs.
Where and how do you find the spark plugs for a 1997 ford expedition?
how many spark plugs are in a 1997 kia?
You can change the spark plugs on the 1997 Toyota Tacoma yourself. Remove the ground wire and spark plug wire. Remove plug. Replace the plug with a plug made specially for your model car.
Remove the fuel tank, Remove air box, Remove spark plug caps, Remove spark plugs ????
Remove the spark plug wires from your 1997 Chevy Express 5.7 liter engine spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
The spark plug gap for a 1999 Honda Civic LX is 0.044. You can use a plug gap tester to check the proper gap. You should always check the gap on all spark plugs prior to replacing the spark plugs.
you have to through the wheel wells to ge to spark plugs. use a long extenison and a spark scocket with a sweival built on to it. good lock