you need to remove the inside panel to get to these bulbs
They are located inside the trunk lid, underneath the felt lining. You need to unsnap and pull back the felt lining to access the bulbs for the license plate light.
From inside the trunk,twist the socket counterclockwise to remove the socket...
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
From the outside of the car.. Just un-screw the two screws and change the bulb.
through the rear package compartment under the matting
Changing the license plate bulb on a 2002 Lincoln LS is quite simple. You must first remove the license plate first. Then unscrew the old bulbs and screw in your new ones.
There are plastic bulb covers on either side of the license plate. Unscrew the screws and take the covers off. From there you can insert new bulbs.
The license plate light bulb in a 2003 Suzuki Grand Vitara can be accessed and changed through the rear cargo area. A portion of the rear door panel will have to be removed. There is a small rectangle that can be popped out by using a screwdriver that is in the middle bottom of the door.
They are located inside the trunk lid, underneath the felt lining. You need to unsnap and pull back the felt lining to access the bulbs for the license plate light.
from inside the trunk pop all of the plastic rivots and you can access the bulbs from the inside..
the plug on the back side of the bumper twists to the left and you pull it out of the bumper