You must remove the four screws that hold in the side marker lenses (two per side/lens) pull the lens forward & out to the side. Next remove the grille, to do this you need to push in both top & bottom of the plastic clips that hold it in place. These clips usually break since they are old (1995) & made of plastic. Each clip costs $1.99 from the Toyota dealership (for .02 cents worth of plastic!) you will probably need a few even though they are way overpriced. Then once the grille is removed you can remove the four bolts that hold the lens assembly in place, once it is removed you unplug the bulb & then unscrew the plastic retaining ring that holds the bulb in place & remove the bulb from the housing. Installation is the reverse of removal - BEWARE; do not touch the glass of the bulb, oil from your skin will cause hot spots on the glass & lead to premature failure of the bulb. If you do happen to touch it, clean the bulb with alcohol prior to assembly.
Method #2; remove the air box on the drivers side (behind the headlight & you can remove the bulb from the back. On the passenger side, remove the battery & the washer fluid reservoir & you can remove it from the back also. Either method is time consuming & an unusually bad hassle for something as routine as changing a headlight.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
How to change headlight bulb 2011 ram 3500
To change one's back headlight, one must first uncover the light bulb. Then one must unscrew the bulb. One must have another bulb to change the headlight. Screw in the new bulb.
you will probably have to take the complete headlight assembly out to get enough room to change the bulb.
To change the headlight bulb on a Pajero Shogun, open the engine compartment hood. Locate the back of the headlight and twist the bulb off. Replace with new.
You cannot replace the headlight bulb. You need to buy a new headlight unit.
pull the complete headlight assembly out and then you can get to the build in the back of the headlight.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
How do I change the nearside headlight bulb on my Vauxhall Vectra 2007
== ==
9004
Could you please tell how I change a headlight bulb for my Volkswagen T4 panel van