Access the boot (trunk). Remove the 3 bullets from the rear trim in the location of the tail light (lever them off) to allow access to the nuts that hold the rear light on. With a 10mm socket remove the 3 nuts (don't lose them behind the trim panel!) and support the tail light unit as it is released. Access the appropriate bulb holder, twist to remove and reveal bulb. Assembly is reversal of removal.
Could you please narrow down what lightbulb?
I have a 2001 celica and it uses a 10watt type E bulb.
You cant just change the bulb, you have to change the whole headlamp.
Raise the engine compartment hood. Take hold of the light bulb connector on the back of the headlight. Push the connector in and turn at the same time. The light bulb will come out. Reverse the process to install the new light bulb.
ljlfljlc
There are three black caps that screw off in the trunk behind the brake light itself unscrew them and the assembly comes out then change bulb
carefully
1999 Toyota Celica tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Remove the tail light from the outside. Pulls out. Replace bulb. There is no access from the inside of the trunk.
It screws in from the rear. TAke the light assy off.
how do you replace headlight bulb in a 2001 celica gts
how can i change bulb