0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you bleed the clutch on a 99 Saturn SL1?
bleed clutch Saturn vue 2003
Where is neutral switch on 2003 ford F150?
how do i find the neutral, or clutch switch on a 2003 ford F150?
How do you bleed the clutch. 2003 Mitsubishi lancer?
same way you bleed the brakes. push clutch all the way to the floor and release the bleed valve on the transmission. tighten it up, release the clutch. Need 2 people to do it.
How do you adjust clutch 1988 ford f150?
how do you adjst clutch on 87ford f150
How do you bleed the clutch in a 95 Daewoo cielo?
there dry clutch's, run a cable. no fluid. .:. you can't bleed it. :)
Is there any way to make adjustments to the hydraulic clutch system on an 86 Ford F150 4 speed manual trans?
no not really , but you can bleed air from it by the same method of bleeding brokes
How do you bleed the clutch line on a 2004 ford ranger edge?
how do I bleed the clutch system in a 2004 ford ranger
When do you bleed your clutch?
after the clutch master cylinder has been replaced.
How much for a new clutch on a F150?
About 900
Where and how do you adjust the clutch on a 94 escort?
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
How do you bleed a clutch on a Nissan stanza?
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
What is wrong when you have to pump your clutch several times to get the cluth to work in a 2002 f150?
The fluid may of been low and now there is air in the lines. You need to bleed the clutch system..or air got in another way...if the clutch plate is worn the cylinder(actuater) may have over extended causing air to get in.
