Remove the inside panel from your Hyundai rear door. The wiper motor mechanism will be visible. Remove the wiper motor linkage. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new rear wiper motor.
Remove the plastic cover from the arm, there is a size 12 nut on its base you can loosen, then just pull the arm by holding it from its base.
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
Remove the wiring harness from the back of your 1995 Chevy Lumina front wiper motor. Remove the traveling arm linkage from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new front wiper motor.
The 2004 Hyundai Sante Fe takes a 22" drivers side, 20" passenger side and a 13" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
in the wiper fuse box!!
I found that my wipers stopped working after I tried to turn them on after a ice condition. The answer was that the wipers are omounted to a tapered fitting and all it needed was to tighted the nut outside at the base of the wiper arm. HOPE THIS HELPS........
Mounted on the firewall directly behind the brake master cylinder reservoir. UNDER WINDSHIELD WIPER COWL COVER remove the wiper arms remove the windshield wiper cowl cover disconnect the eletrical connector from the wiper motor and remove the motor remove the wiper motor retsining bolts pry the linkage arm off the wiper motor pin with large screwdriver
just twist the the end piece of the front wiper lever. left hand side on the European model
As of 2011, all Hyundai Accent model years come equipped with hook-end wiper arms (with the exception of the rear wiper on the 2007+ models which has a Roc Lock 2 arm attachment). See sources and related links below for wiper blade installation videos.