The timing belt warning light, on a Toyota Innova, can be reset by removing the timing belt warning light fuse. Leaves the fuse out for 10 seconds and put it back in.
how to reset the vigo timing belt warning light
You can reset the timing belt warning light, on your Toyota Dyna 4093 5L motor, by removing the fuse. Keep the fuse out for about 10 seconds and then put it back in.
the warning lights comes on indicating that the timing belt needs to be changed. even once the timing belt is changed, the warning light will stay on until is it reset.
un install one of your battery cables for about 5 min. or you can try hoding the trip button and start the car
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
You do not reset a timing belt you replace it.
According to the repair manual: Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet.
how to reset oil timing on 1990 toyota
1. In the speedometer there are one Push Button to select between ODO and trip meter a/b 2. With the ignition key in ON Position but no start the engine push this PB to select the ODO. 3. Switch OFF the IGN key, push and hold the PB, turn the IGN key to ON (not start while hold the PB for more than 5 sec) 4. release the PB and push again for more than 5 sec, release it (In this position the ODO change to "15") 5. Switch off the IGN key and the Job is Finished. 6. Start the engine and check the Timing Belt warning. Warning, even the timing belt warning are gone, the timing belt itself is worn out, so lease chang the timing belt before reset it
on 2014 Toyota hiace
coaster bus how do you reset timing belt light 2010