http://www.commandocaralarms.com/wiring/1989/Nissan/Pulsar
40 litres
In a 1989 Nissan Pulsar NX : The 1.6 litre four cylinder engine has a timing CHAIN The 1.8 litre four cylinder engine has a timing BELT
On a 1.6 litre, it's 7 degrees btdc.
To ensure your safety, please call or visit your local Nissan Dealership. Thank You. -Nissan of America. :) :) :)
It's a green relay located under the left (driver's) side of the dash
The estimated cost to replace a clutch and radiator, in a 1989 Nissan pickup truck is $1100. A private mechanic may be able to do the job for less.
I was able to change the starter on my 1989 Nissan pulsar, by first lifting the front of the car. Then I placed a jack under the passenger side of the engine. Then remove the bolt from the passenger side of the motor. Then jack the side of the engine till you can access the bolts on the starter. The bolts also serve as a mount for the transmission. There is one wire hookup. The stud on the starter is a light guage metal, and can be striped very easy. So be careful.
Possibly not. For on some cars, the ethanol component can damage seals. But you should check with the car manufacturer, in writing!
Ha yes timing belt breakage in any car can cause damage to the engine... things like bent valves, scored cylinder walls and possible engine failure. That is why the idea is to replace timing belts before they break.
what year maxima? 1989-1994 on the bottom.. 1995-2000 in the middle..
It's built into the water pump. You have to replace the water pump.