distributor or coil
The leading and trailing coils have the igniters within the coils
bad coil pack... replace coil pack
1-3-4-2 is the firing order. Coil on the left is 4 then 1. Coil on the right is 3 then 2.
I have listed the coils in order from the front of the car to back in the stock coil location. Coil input colors can confirm this. 1) Green coil input wire is Leading plug front rotor (bottom-front spark plug) 2) White coil input wire is trailing plug front rotor (top-front spark plug) 3) Yellow coil input wire is Leading plug rear rotor (bottom-rear spark plug) 4) Blue coil input wire is trailing plug rear rotor (top-rear spark plug) Hope this helps.
The B2600i does not have a pickup coil, it uses a hall effect sensor located inside the distributor to trigger spark. K6 Mazdatruckin.com
what side is the number one cylinder? is it the right front?
If you have replaced your trailing coil, you may want to check the ground connections between your engine, body, and negative battery terminal. This will usually solve the problems you are describing, as well as others that may not be fully apparent.
Where is the igniyion coil on a2002 mazda protege
The coil pack towers are numbered : coil---3---4 pack--2---6 plug---1---5
The firing order on a 1997 Mazda 626 LX 4 cylinder is 1, 3, 4, 2. The number 1 cylinder is located at the end of the engine closest to the pulleys and belts.
Your plugs are bad, you coil is out or you have bad plug wires. If all spark plug wires are not firing then it is the coil or a fuse in the fuse box labeled ign hope this helps B