I just did this on my 2000 MPV. Open the rear hatch and remove the two screws. To remove the assembly it needs to be pushed straight out to the side (not towards the back as one would think). Some force may be required to remove it as there are two posts that are held by clips, one on the bottom and one on the top. I actually held it with one hand and hit the back of it sideways with the other hand, freeing the bottom first and then the top, being careful not to twist the thing. Next remove the light socket and replace bulb. Then reassemble.
Check for a blown fuse.
Timing belt problem.
Cabin air? It's behind the glovebox.
Brake fluid location in 1992 Mazda mpv
push it forward the it should come off
Your Mazda dealer can replace the keys using the codes for your particular vehicle, or in the worst case re-key the ignition and doors.
nb,
no, you should have to press the brake to shift out of park
Try Changing your fuel filter.
If a Mazda MPV is leaking yellow fluid then it is possible that the fluid is brake fluid. It is best to take the car to a mechanic right away.
2000 Mazda MPV center high mount stop (third 3rd brake light) light bulb lamp replacement procedure: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
how to reset check engine light on 1992 Mazda mpv