The nails should be covered by the shingles or caulk. They should not be rusting.
When the weather becomes very hot, the metal roofing sheet expand and in attempt to free themselves from the grip of nails, cracking noise is heard.
25
Galvanized roofing nails with a minimum 12-gauge shank and head diameter of at least 3/8 inch are the most preferred and best roofing nails for installing asphalt roof at the coast.hwroofing.net
Roofing nails are zinc coated to help prevent corrosion and rusting when exposed to the elements. The zinc acts as a protective barrier, increasing the longevity and durability of the nails in outdoor applications like roofing.
You would need around 10 pounds of roofing nails for 2033 nails based on the standard estimate of approximately 200 nails per pound.
On average, there are about 220 roofing nails per pound when they are 1.25 inches in length. The exact number can vary based on the specific weight of the nails.
Place the first course to overhangs the drip edges by about 1/4 inch and roll it out about 8 feet. At one end, drive nails every 3 inches along with the rake, then pull it taut and drive nails along the eave edge. Nails should be about 1 inch away from the edges.
You can buy them from roofing shops or Bunnings <Maybe check here first.
With galvanized roofing nails, usually.
There are approximately 250 nails to a roofing coil. When you buy them in a case they typically have around 7200 nails total. Hope that helps!
approximately 1000 nails 1-1/4