If the problem is that the inside door slider is stuck in the down position then it's probably that the rocker mechanism attached to the outside handle (just behind the slider) is rusty and the rocker won't drop when the outside handle is lifted and released. Remove the door trim: Torx screws hold on the armrest and door pocket and the other plastic parts just pull off; and prise off the trim, getting your fingers close to each of the plastic poppers. Spray penetrating oil into the top corner of the door and work the rocker free.
Its best to first remove the trim off the door, then on the side of the door is a little plastic plug, remove this. Following that find something to put into the hole to knock the metal seal off(a pen or similar) you may have to hit this with a shoe. Now remove the barrel currently in the door and replace with the new barrel. Push the seal back over the barrel and put the trim back on.
Need more information. Too general a question.
The Peugeot 205 is made by the French car manufacturer Peugeot. The Peugeot 205 was a small econoical car manufactured between 1983 and 1998.
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
Peugeot 205
peugeot 205 trio 1.1 has a bhp of 55 as standard
if its a 205 gti the door will go right on as 1993 & 1995 are both phaise 2 models if its a standared 205 not to sure.
all peugeot 205's have a fuel capacitie of 50 litres
i could go through it for you but you could go and buy a haynes manual that will tell and show you exactly how to overall your brakes
Remove the inside boot trim and then pull away the metal clip holding it in. It can then just be pulled straight out from outside the car.
behind the headlights
Simple - NO IT IS HOT!
check fuse for cooling fan, or possibly temperature sensor at inlet.