Depending on the color and type of plastic surface, you can wet sand the plastic with 1500-2000 grit sand paper. Sand real lightly, and sand enough to see the stains disappearing from the sanding area. Be sure to keep sand paper level with surface, do not used finger tips, will leave grooves. Now depending on the surface rather semi- or glossy, wipe with a degreaser, that does not contain acetone. Spray plastic surface with a clear coat finish, either semi or glossy. Works great on plastic headlights on vehicles.
Acetone can be kept in a plastic bottle made from high-density polyethylene (HDPE) or polyethylene terephthalate (PET) since these materials are resistant to acetone. Avoid storing acetone in bottles made from other types of plastic, as it may cause the plastic to degrade and leak.
Acetone can dissolve some types of plastic, but it does not actually bond with the plastic in a chemical way. It can soften the plastic, making it sticky or malleable. It's important to use acetone with caution around plastics, as it can cause damage.
Acetone
Acetone can ruin plastic cuvettes because it can cause the plastic material to dissolve or degrade. The chemical structure of acetone can interact with the plastic, leading to changes in its physical properties and potentially causing it to become cloudy, brittle, or deformed. It is important to use compatible materials when handling chemicals to avoid damage.
Yes, it can, just don't add too much acetone.
Answer Acetone will dissolve many dyes so probably yes. Acetone will also dissolve many plastic based cloths.
One common solvent used in dissolving plastic wrappers is acetone. Acetone can break down many types of plastics and is commonly found in household products such as nail polish remover. It is important to use acetone in a well-ventilated area and avoid prolonged skin contact.
Get some plastic polish from the local Plastics store ( there is one in almost every city. - Acetone is known solvent for fibreglass, - don't let it near any fiberglass finish, it may be polished out,but it's not easy.
To produce plastic yourself, you can do the following:Materials needed:AcetoneGlass container with lidStyrofoamStep1Remove the lid from the glass container and pour a small amount of acetone into it. Acetone is used as paint thinner and can be found at hardware stores. Fill ½ inch of the jar with the acetone to start, and add more later if needed.Step2Break the Styrofoam into small pieces.Step3Drop the Styrofoam into the acetone jar. As it hits the acetone it melts. Continue to add Styrofoam into the jar until it stops melting. If you need more plastic than the amount of Styrofoam in the jar, pour more acetone and then add more Styrofoam.Step4Wait for 5 minutes to allow some of the acetone to evaporate. If you want to mold the plastic, wait 1 more minute. At that time, the plastic is easily shaped. Sculpt it into whatever shape you want.
There is no easy way that I know off, and I've tried many times. The acetone actually etches the plastic. You have to get 3 grades of plastic polish and patiently rub it one grade at a time till it comes smooth again.
You can find detailed instructions on how to repair burn marks on a flat screen TV on ehow.co.uk/how_5749492_fix-marks-flat-screen-tv.html
It can't. Hydrochloric Acid is sold in plastic bottles for this very reason. Try Acetone.