How do you remove water rings from marble?

Answer 1

You can use a combination of neutral cleaning agent, such as anti-bacterial dishwashing detergent and warm water, or purchasing one of the widely available stone cleaning products. Avoid streaks and dullness, by buffing off the wet surface with a dry cloth.

If this doesn't work, try purchasing a cleaner sold specifically for marble. Purchase this from a company that sells the marble itself. They will be able to recommend the best products for your job. If the stain is actually etching you will need to polish the marble to remove the stain. Etching can be identified be feeling the area with your fingertips. If it feels slightly rough or you feel a slight depression in the spot it is most likely going to require polishing. Again, a store that sells marble can help you here as well.

Do Not use acidic, abrasive, wax or bleach based household cleaners and sprays on either marble or granite.

It is advisable not to use acid cleaners on marble. The top surface can be gradually dissolved by acids and expose the layer underneath and cause a lot of damage. See the method below for a tried and tested procedure:

Natural Formula to Use:

A mixture of baking soda and warm water

Method to Use:

1.Make up the mixture of water and baking soda

2.Scrub stains on the marble with a soft brush or sponge

3.Rinse thoroughly with water to remove all residue

Tip:

When scrubbing the stains be careful to rub gently as once the surface has been scratched it easily picks up any grease, dirt or soap residue.

Answer 2

Check out my article on removing white rings:

http://raidz.net/blog/how-remove-white-rings-and-water-spots-your-furniture