I had issues with the arm rest coming loose and wobbling and I ended up removing the driver side arm rest and the passenger side arm rest and swapping the two. To remove the arm rest, peel back the velcro at the base of the arm rest, peeling back the cover and revealing the bolt. Then, simply loosen the bolt using a Torx bit size T60 I believe, and that should remove the arm rest.
I had issues with the arm rest coming loose and wobbling and I ended up removing the driver side arm rest and the passenger side arm rest and swapping the two. To remove the arm rest, peel back the velcro at the base of the arm rest, peeling back the cover and revealing the bolt. Then, simply loosen the bolt using a Torx bit size T60 I believe, and that should remove the arm rest.
First fold down the back rest by pushing on the release button (you only need to push on one end). On either side of the back rest there are bolts (8mm or 9mm). Undo these and the back rest should putt out.
how do you remove the head rest for a sport track
first bring down the back rest and you will see two bolts on each lower side unscrew those and put the back rest aside, then unscrew the lower seat a lift from the back. Unlatch the top of the back seat inside the trunk. Lower the seat back, remove the black plastic rivet that attaches the trunk mat to the seat back. Remove the fabric that covers the pivot bolts. Remove one 10mm bolt from each side. Remove the seat back from the car. Remove the bolt from the tab at the right center of the rear edge of the seat bottom. The back edge of the seat bottom lifts up, pivot it forward, and remove the hooks from the slots in the floor. Remove trim to access the fuel access panel.
what year, ? old answer was inane and wrong answer. the back set. look down see on left and right side 2 plastic covers. remove them with pry screwdriver remove 4 bolts. seat is out. the rest is obvious.
Take the 4 bolts out that hold the back rest to the base. Remove the seat back and separate the cloth at the bottom. Spread the foam away from the frame and remove the C clip and elastic band then remove armrest. Re install C clip and elastic keeper and put seat back back together before you try to re attach the arm rest. To re attach put armrest back in position an smack down until it locks in place. Ta Da!!!
battery is under back seat sit in middle of backseat push back against back rest lift legs slightly reach under seat and yank up
You have to remove the entire rear interior- arm rests, all the plastic, etc. It comes loose in one piece. This link has a step-by-step how-to-http://as.timsoft.com/spikey/quarterwindow.html
front or back speakers? the back speakers, you must remove the rear seat. it is simply held by two bolts on the bottom edge of the seat. once you get them out, there is two torx bolts you must remove. then you will just pick up on the back rest and it will easily come out.
remove black plastic panel on inside behind mirror. remove switch panel by pushing forward then lifting up. disconnect wiring. remove panel covering door handle[one screw]. remove screw behind this panel. remove screw at top of arm rest from underneath rest. remove screw from underneath back corner of armrest.now lift straight up on door panel.
Below the seat at floor level, there are two bolts hidden under the edge of the seat. Once you remove them, the seat simply lifts out. Then removing the seat belt bolts and pulling up on the back rest removes it...