0
by 3 inches 3 inches
- 1 piece of wood about 24 inches by 2 inches by 2 inches
- 2 pieces of wood about 12 inches by 2 inches (a bit thicker than a ruler)
- 2 small blocks of wood about 2 inches by 2 inches by 2 inches
- 2 pieces of pencil-like wood
- 2 wooden cylindrical pieces of wood or 2 cut pieces of PVC pipesabout 2 inches
- 2 washers
- 2 metal poles of about 2 inches in length
- 2 hoop hooks
- thin rope
- strong nylon or rubber
- nails
Now, you can start assembling the base. First, you would need to nail the second piece of wood (12″x 3″x 3″) to the edge of the block of wood (align it to the 12″ side). Now turn it so that the block of wood would be on top of the smaller wood. This would create a raised position for one side of the block of wood.
At this point, nail the third piece of wood (24″x 2″x 2″) to the center of the top portion of the big block of wood.
Then, nail one of the ruler-like pieces of wood to the wood in the center of the block. This would now make it look like a letter "T".
Now, put the two small blocks in between the horizontal part of the "T" (these should be placed about three inches from where you have nailed it a while ago). Then, place the other ruler-like wood on top of these blocks. Now connect these pieces of wood by driving a nail through the first ruler like wood, then through the blocks, then to the other ruler like wood. (Note: from the top view, this should also still look like a "T"
After this, attach the two cylindrical pieces of wood (two inches) in between the horizontal part of the "T", on both ends.
Then, place the two washers on the top portion of the horizontal part of the "T" (about three inches from both ends). Drill two holes through the washers straight down through the wood. (Drill a hole on both sides of the horizontal part of the "T".) Secure the washers by screwing or nailing them.
Inside the horizontal part of the "T", attach the hoop hooks (between the block of wood and the cylindrical wood, one on each side). From each hoop hook, insert the rope, and then start twisting the said rope. Halfway through, insert the pencil-like piece of wood (through the twist, make sure you secure the pencil like wood). Continue twisting until you reach the washer portion.
At this point, insert the rope through the wood and into the washer. Next, place the metal pole on top of the washer holes in a horizontal position. The ropes should now be tied and secured to the poles. Cut the excess of the rope.
Take the nylon or rubber strings and tie each of its ends to the pencil like wood. (You may tape it to make it more secure.)
Add your answer:
Earn +20 pts
Where can you find an article about the roman ballista?
To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.To find articles about the Roman ballista, just use your browser. Type in "ballista" or "roman ballista" and you'll come up with several.
What is the birth name of Gigi Ballista?
Gigi Ballista's birth name is Luigi Ballista.
How did the Romans get the idea of making a ballista?
The Romans adopted the ballista from the Greeks and perfected it. Ballista is a Greek name.
Why is the ballista important to Rome?
The ballista was a powerful siege machine.
When was Top Ballista created?
Top Ballista was created in 1989.
How tall is Gigi Ballista?
Gigi Ballista is 6' 2".
Who inveted the ballista?
Alexander the Great was credited with inventing the first ballista. The Romans then improved on his design, and the Romans invented the Repeating ballista
Where was the ballista made?
The ballista was invented by the Ancient Greeks atSyracuse in 399 BC
What is the physics behind a ballista?
A ballista is a giant bow. Bows are a form of spring.
What was a Roman ballista?
A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.A Roman ballista was a military device or engine for throwing large stones.
When was tha ballista catapult made and by who?
It was made by an ancient china boy named Stewie, who was trying to make a Catapult
How does a catapult and ballista work?
Yes, it is a catapult. Just like a mangonel but not a trebuchet.
